Brief introduction of multi-cylinder hydraulic cone crusher:
The multi-cylinder hydraulic conical crusher is mainly used in the secondary or tertiary crushing links in sand and stone processing. The machine has advantages in crushing materials with high hardness and fine crushing, so it is widely used in crushing medium and hard materials such as river pebbles, granite and basalt. On the basis of the traditional multi-cylinder hydraulic conical crusher spindle fixed, eccentric sheathed spindle rotating structure and lamination crushing principle, Phoenix has made a breakthrough optimization of the equipment structure, and improved the equipment performance and crushing ability. Hydraulic lubrication system guarantees reliable operation of equipment, while operating control is more intelligent and humane.
Principle of multi-cylinder hydraulic cone crusher:
The multi-cylinder hydraulic cone crusher drives the pulley or coupling, the transmission shaft and the cone part of the motor to make the eccentric shaft swing periodically under the axis line when it works. After the material enters the crushing chamber from the opening, it is crushed by the impact extrusion, grinding and rubbing of the eccentric shaft and the rolling mortar wall. Hydraulic insurance system can eliminate the failure of support sleeve and fixed cone by hydraulic pressure when the machine has iron fault or stuffy phenomenon. It can play a very good insurance role and greatly reduce the maintenance rate and improve production efficiency.
Performance characteristics of multi-cylinder hydraulic cone crusher:
1. Structural upgrading is more efficient. Based on the structure of fixed spindle and eccentric sleeve rotating around the spindle, the design of transmission parts and lubrication seal structure is further optimized. The equipment of multi-cylinder hydraulic cone crusher has strong bearing capacity, large installed power, small volume, high efficiency and low noise.
2. Large capacity. The combined design of crushing stroke, crushing speed and crushing chamber type can increase the output of multi-cylinder hydraulic cone crusher by 35% - 60% compared with traditional cone crusher.
3. The multi-cylinder hydraulic cone crusher has good grain shape when laminating and crushing. The principle of lamination crushing is used to crush materials. By optimizing the equipment and cavity, the efficiency of lamination crushing is improved, the crushing efficiency is high, the wear of vulnerable parts is low, the finished product is cubic, and the content of fine particles is high. Improve the quality of finished products, reduce the production cost of equipment and the whole system.
4. Full hydraulic control is accurate and reliable. The equipment is operated by hydraulic pressure from cavity cleaning, overload protection to adjustment and locking. The multi-cylinder hydraulic cone crusher works stably and reliably, and is easy to operate. The structure of hydraulic system is optimized and upgraded in an all-round way, the adjustment and control are more accurate, and the automatic protection response is more sensitive.
5. High crushing ratio. SC series multi-cylinder hydraulic conical crusher has obvious advantages of high crushing ratio when the material hardness is large and the particle size requirement of finished products is small.
Product parameters of multi-cylinder hydraulic cone crusher:
|
Model
|
MaxFeeding
Size(mm)
|
Discharge
Range(mm)
|
Motor
Power
(kW)
|
Capacity(tons/h)——opencircuit,closeddischarge(mm)
|
|
9
|
13
|
16
|
19
|
22
|
26
|
31
|
38
|
51
|
|
SC150C
|
65
|
22~31
|
90
|
30-41
|
50-66
|
75-86
|
90-102
|
100-123
|
110-132
|
130-158
|
|
|
|
SC150M
|
135
|
13~26
|
|
SC150F
|
55
|
9~19
|
|
SC200C
|
180
|
22~31
|
160
|
55-62
|
70-93
|
100-140
|
130-170
|
165-195
|
175-220
|
195-230
|
|
|
|
SC200M
|
140
|
13~31
|
|
SC200F
|
60
|
9~22
|
|
SC280C
|
250
|
26~51
|
200
|
58-72
|
72-98
|
130-150
|
170-210
|
190-220
|
230-260
|
270-298
|
299-322
|
325-350
|
|
SC280M
|
160
|
16~38
|
|
SC280F
|
80
|
9~22
|
|
SC400C
|
300
|
32~63
|
315
|
120-145
|
140-180
|
200-240
|
230-300
|
270-340
|
295-368
|
310-410
|
350-450
|
460-550
|
|
SC400M
|
230
|
22~51
|
|
SC400F
|
80
|
13~26
|
Note: The production capacity in the table is open-circuit production.
The production capacity is related to the feeding mode, physical properties, crushing ratio and composition of crushed materials.
Multi-cylinder Hydraulic Cone Crusher Exit Picture:
Multi-cylinder Hydraulic Cone Crusher Delivery Picture:
Pictures on site of multi-cylinder hydraulic cone crusher:
Video of multi-cylinder hydraulic cone crusher:
Price of multi-cylinder hydraulic cone crusher:
The price is determined by the model chosen by the customer, so please call for it.
Multi-cylinder Hydraulic Cone Crusher Purchase Telephone:+86-021-33781259 Email：
[email protected]